Digital Signal Processing

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Automation of K5401 Air Compressor Using PLC


Affiliations
1 Department of Instrumentation and Control Engineering, Tamilnadu College of Engineering, Karumathampatti, Coimbatore-641549, Tamilnadu, India
     

   Subscribe/Renew Journal


In the four stages centrifugal air compressor was controlled based on interlocking system. Based on this system various pressure switches and flow switches are provided to check the preset status of the process variables. If any one of the variables changes from the present value then the smooth functioning of the hindered and damaged to the system. To overcome the problem of the existing system we proposed to implement the Programmable Logic Controller (PLC). The several conditions of  the air compressor (K5401),  has to be continuously analyzed before, after and during the working period of the lube oil pressure, control oil pressure, vibration, flow of steam to turbine etc. These controlled parameters are efficiently controlled by using PLC compared to relay system.

Keywords

Air Compressor (K5401), Programmable Logic Controller (PLC), Relay Logic.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Shaoyong Liu, Zhepeng Liu and SidudjingKawi,“Liquid-Phase Oxidation Of Cyclohexane Using Co-P-MCM-41 Catalyst” Korean J. Chem. Eng., 15(5),510-515(1998).

  • Konstantin O. Boinov, Elena A. Lomonova, André J. A. Vandenput, and AndreyTyagunov, “Surge Control of the Electrically Driven Centrifugal Compressor” IEEE transactions on Industry applications, Vol. 42, No. 6, November/December 2006.

  • FriederEndrejat, and PragasenPillay, “Ride-Through of Medium Voltage Synchronous Machine Centrifugal Compressor Drives” IEEE transactions on Industry applications, Vol. 47, No. 4, July/August 2011.

  • Sarah S.Y. Lam, Alice E. Smith, Badie I. Morsi, “ Estimation Of A Mass Transfer Coefficient For Nylon Manfacture Using Multiple Neural Network” Journal of Manufacturing SystemsVol. 20/No. 5, 2001.

  • Frank Williams and Bram De Jager, “Modeling And Control Of Compressor” IEEE Control Systems, October 1999.

  • Perry’s Chemical Engineering hand book 8th edition.

  • A.Sodemann and J.Lee, “Data-Driven Surge Map Modeling For Centrifugal Air Compressor” 2006 ASME International Mechanical Engineering Congress and Exposition, November 2006.


Abstract Views: 330

PDF Views: 5




  • Automation of K5401 Air Compressor Using PLC

Abstract Views: 330  |  PDF Views: 5

Authors

Jegan Diravianath
Department of Instrumentation and Control Engineering, Tamilnadu College of Engineering, Karumathampatti, Coimbatore-641549, Tamilnadu, India
Basil T. Kuriakose
Department of Instrumentation and Control Engineering, Tamilnadu College of Engineering, Karumathampatti, Coimbatore-641549, Tamilnadu, India
Manish V. Thomas
Department of Instrumentation and Control Engineering, Tamilnadu College of Engineering, Karumathampatti, Coimbatore-641549, Tamilnadu, India
K. P. Pranav
Department of Instrumentation and Control Engineering, Tamilnadu College of Engineering, Karumathampatti, Coimbatore-641549, Tamilnadu, India
Sarath Joshy
Department of Instrumentation and Control Engineering, Tamilnadu College of Engineering, Karumathampatti, Coimbatore-641549, Tamilnadu, India

Abstract


In the four stages centrifugal air compressor was controlled based on interlocking system. Based on this system various pressure switches and flow switches are provided to check the preset status of the process variables. If any one of the variables changes from the present value then the smooth functioning of the hindered and damaged to the system. To overcome the problem of the existing system we proposed to implement the Programmable Logic Controller (PLC). The several conditions of  the air compressor (K5401),  has to be continuously analyzed before, after and during the working period of the lube oil pressure, control oil pressure, vibration, flow of steam to turbine etc. These controlled parameters are efficiently controlled by using PLC compared to relay system.

Keywords


Air Compressor (K5401), Programmable Logic Controller (PLC), Relay Logic.

References